Download files
Abstract
Natural organic matter (NOM) occurs ubiquitously in drinking water supplies and is problematic since it serves as a precursor to disinfection by-products (DBPs) formation. Stricter DBP regulations will drive utilities to consider advanced treatment processes for DBP control through NOM removal. Herein, the transformation of NOM in homogeneous (UVA/H2O2 and UVA/Fe/H2O2) and heterogeneous (UVA/TiO2) Advanced Oxidation Processes (AOPs) were studied.
Organic matter from three different sources was investigated in this work, specifically a commercial humic acid, and two Australian surface water sources. The transformation of the organic matter as a result of oxidation was investigated through multiple analytical techniques, such as UV-Vis spectroscopy, DOC analysis, high performance size exclusion chromatography (HPSEC), resin fractionation, liquid chromatography with organic carbon detection (LC-OCD) and disinfection byproducts formation potential. The multi-analysis approach is required due to the complex and heterogeneous nature of NOM. Each analytical technique provides complementary information on different properties of NOM, leading to a comprehensive understanding on how AOPs transform the chemical and physical properties of NOM.
Both homogeneous and heterogeneous AOPs were found to be effective for NOM removal. However, complete mineralisation was not achieved, even under prolonged irradiation. Large aromatic and hydrophobic organics were degraded into lower molecular weight hydrophilic compounds, which had weak UV absorbance at 254 nm. In the UVA/TiO2 treatment, multi-wavelength HPSEC analysis demonstrated the formation of low molecular weight compounds with strong absorbance at wavelength lower than 230 nm. These residual organic compounds, though recalcitrant, had a low reactivity to chlorine to form THMs, and were identified to be low molecular weight acids and neutral compounds from LC-OCD analysis.
Finally, the current work reports the novel synthesis of magnetic photocatalyst for NOM oxidation from low cost precursors to solve the separation problem of nano-sized particles. Magnetite particles were coated with a layer of protective silica from sodium silicate precursor. Photoactive titanium dioxide was then deposited onto the silica coated particles using titanium tetrachloride precursor. The as-prepared magnetic photocatalyst exhibited excellent stability and durability. Although the photoactivity of the magnetic photocatalyst is lower than commercial TiO2 photocatalyst, it can be easily recovered by magnetic field.