Publication:
A predictive depth of penetration model for abrasive waterjet cutting of polymer matrix composites

dc.contributor.author Wang, Jun en_US
dc.contributor.author Guo, D.M. en_US
dc.date.accessioned 2021-11-25T12:31:22Z
dc.date.available 2021-11-25T12:31:22Z
dc.date.issued 2002 en_US
dc.description.abstract A common defective phenomenon in abrasive waterjet (AWJ) cutting of layered materials such as polymer matrix composites is delamination which occurs only when the jet is unable to cut through the workpiece. It is therefore essential to predict the depth of penetration in order to achieve through cuts and to eliminate delamination. A semi-empirical model is developed for predicting the depth of jet penetration in AWJ cutting of polymer matrix composites. The plausibility of the model is then assessed by analysing the predicted trends of this performance measure and by comparing with the experimental results. It is shown that the model gives adequate predictions and can be used for process planning. en_US
dc.identifier.uri http://hdl.handle.net/1959.4/11032
dc.language English
dc.language.iso EN en_US
dc.rights CC BY-NC-ND 3.0 en_US
dc.rights.uri https://creativecommons.org/licenses/by-nc-nd/3.0/au/ en_US
dc.source Legacy MARC en_US
dc.subject.other 290399 Manufacturing Engineering not elsewhere classified. en_US
dc.subject.other Depth of penetration. en_US
dc.subject.other Waterjet cutting. en_US
dc.subject.other Layered composites. en_US
dc.subject.other Predictive model. en_US
dc.title A predictive depth of penetration model for abrasive waterjet cutting of polymer matrix composites en_US
dc.type Journal Article en
dcterms.accessRights open access
dspace.entity.type Publication en_US
unsw.accessRights.uri https://purl.org/coar/access_right/c_abf2
unsw.relation.faculty Engineering
unsw.relation.ispartofissue 203 en_US
unsw.relation.ispartofjournal Journal of Materials Processing Technology en_US
unsw.relation.ispartofpagefrompageto 390-394 en_US
unsw.relation.ispartofvolume 121 en_US
unsw.relation.originalPublicationAffiliation Wang, Jun, Mechanical & Manufacturing Engineering, Faculty of Engineering, UNSW en_US
unsw.relation.originalPublicationAffiliation Guo, D.M., Dalian University of Technology, Dalian, China en_US
unsw.relation.school School of Mechanical and Manufacturing Engineering *
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
Peer-reviewed version.pdf
Size:
48.8 KB
Format:
application/pdf
Description:
Resource type