Publication:
Effect of Inverted Aerofoil Geometry on Aerodynamic Performance in Ground Effect
Effect of Inverted Aerofoil Geometry on Aerodynamic Performance in Ground Effect
| dc.contributor.author | Vogt, Jonathan William | en_US |
| dc.contributor.author | Barber, Tracie J | en_US |
| dc.contributor.author | Leonardi, Eddie | en_US |
| dc.date.accessioned | 2021-11-25T12:46:33Z | |
| dc.date.available | 2021-11-25T12:46:33Z | |
| dc.date.issued | 2008 | en_US |
| dc.description.abstract | A two-dimensional Computational Fluid Dynamics (CFD) study was undertaken to examine the effect of various inverted (downforce generating) aerofoil geometry configurations on the ground effect phenomena seen at low ground clearances. Simulations were conducted and comparisons made between a NACA4412 aerofoil, a Tyrrell aerofoil and three modified Tyrrell aerofoils. The results indicate underwing ground effect suction is heavily influenced by the curvature on both sides of the aerofoil. | en_US |
| dc.description.uri | http://ictam2008.adelaide.edu.au/publications.php | en_US |
| dc.identifier.uri | http://hdl.handle.net/1959.4/37555 | |
| dc.language | English | |
| dc.language.iso | EN | en_US |
| dc.rights | CC BY-NC-ND 3.0 | en_US |
| dc.rights.uri | https://creativecommons.org/licenses/by-nc-nd/3.0/au/ | en_US |
| dc.source | Legacy MARC | en_US |
| dc.subject.other | Computational Fluid Dynamics | en_US |
| dc.subject.other | Aerodynamics | en_US |
| dc.subject.other | Ground effect | en_US |
| dc.subject.other | Inverted Aerofoil | en_US |
| dc.subject.other | Aerodynamics (290201) | en_US |
| dc.subject.other | Automotive Engineering (290401) | en_US |
| dc.title | Effect of Inverted Aerofoil Geometry on Aerodynamic Performance in Ground Effect | en_US |
| dc.type | Conference Paper | en |
| dcterms.accessRights | open access | |
| dspace.entity.type | Publication | en_US |
| unsw.accessRights.uri | https://purl.org/coar/access_right/c_abf2 | |
| unsw.description.notePublic | Short paper and poster presentation | en_US |
| unsw.identifier.doi | https://doi.org/10.26190/unsworks/370 | |
| unsw.relation.faculty | Engineering | |
| unsw.relation.ispartofconferenceLocation | Adelaide, Australia | en_US |
| unsw.relation.ispartofconferenceName | XXII International Congress on Theoretical and Applied Mechanics | en_US |
| unsw.relation.originalPublicationAffiliation | Vogt, Jonathan William, Mechanical & Manufacturing Engineering, Faculty of Engineering, UNSW | en_US |
| unsw.relation.originalPublicationAffiliation | Barber, Tracie J, Mechanical & Manufacturing Engineering, Faculty of Engineering, UNSW | en_US |
| unsw.relation.originalPublicationAffiliation | Leonardi, Eddie, Mechanical & Manufacturing Engineering, Faculty of Engineering, UNSW | en_US |
| unsw.relation.school | School of Mechanical and Manufacturing Engineering | * |