Publication:
Mapping of Thermoplastic Elastomeric Nitrile rubber/poly(styrene-co-acrylonitrile) blends using Tapping mode Atomic Force microscopy and Transmission Electron Microscopy
Mapping of Thermoplastic Elastomeric Nitrile rubber/poly(styrene-co-acrylonitrile) blends using Tapping mode Atomic Force microscopy and Transmission Electron Microscopy
| dc.contributor.author | Anandhan, S | en_US |
| dc.contributor.author | De, P | en_US |
| dc.contributor.author | De, S | en_US |
| dc.contributor.author | Bhowmick, A | en_US |
| dc.contributor.author | Bandyopadhyay, Srikanta | en_US |
| dc.date.accessioned | 2021-11-25T13:12:10Z | |
| dc.date.available | 2021-11-25T13:12:10Z | |
| dc.date.issued | 2003 | en_US |
| dc.description.abstract | Dynamically vulcanized thermoplastic elastomeric blends of nitrile rubber (NBR)/poly(styrene-co-acrylonitrile) (SAN) were mapped by tapping mode atomic force microscopy (TMAFM) and transmission electron microscopy (TEM). The morphology changes with the blend ratio and dynamic vulcanization. Roughness and surface analysis were used to study the effect of dynamic vulcanization and mixing sequence on the surface texture of the thermoplastic elastomeric blends. Surface geometry was quantified by power spectral density (PSD) and fractal analysis. | en_US |
| dc.identifier.issn | 0022-2461 | en_US |
| dc.identifier.uri | http://hdl.handle.net/1959.4/39377 | |
| dc.language | English | |
| dc.language.iso | EN | en_US |
| dc.rights | CC BY-NC-ND 3.0 | en_US |
| dc.rights.uri | https://creativecommons.org/licenses/by-nc-nd/3.0/au/ | en_US |
| dc.source | Legacy MARC | en_US |
| dc.title | Mapping of Thermoplastic Elastomeric Nitrile rubber/poly(styrene-co-acrylonitrile) blends using Tapping mode Atomic Force microscopy and Transmission Electron Microscopy | en_US |
| dc.type | Journal Article | en |
| dcterms.accessRights | metadata only access | |
| dspace.entity.type | Publication | en_US |
| unsw.accessRights.uri | http://purl.org/coar/access_right/c_14cb | |
| unsw.identifier.doiPublisher | http://dx.doi.org/10.1023/A:1024416031172 | en_US |
| unsw.relation.faculty | Science | |
| unsw.relation.ispartofissue | 13 | en_US |
| unsw.relation.ispartofjournal | Journal of Materials Science | en_US |
| unsw.relation.ispartofpagefrompageto | 2793-2801 | en_US |
| unsw.relation.ispartofvolume | 38 | en_US |
| unsw.relation.originalPublicationAffiliation | Anandhan, S, Materials Science & Engineering, Faculty of Science, UNSW | en_US |
| unsw.relation.originalPublicationAffiliation | De, P | en_US |
| unsw.relation.originalPublicationAffiliation | De, S | en_US |
| unsw.relation.originalPublicationAffiliation | Bhowmick, A | en_US |
| unsw.relation.originalPublicationAffiliation | Bandyopadhyay, Srikanta, Materials Science & Engineering, Faculty of Science, UNSW | en_US |
| unsw.relation.school | School of Materials Science & Engineering | * |