Development of novel fibre optic devices and subsystems for next generation DWDM systems

Abstract

As the backbone for the global communication network, optical dense wavelength division multiplexed (DWDM) systems are facing challenges in capacity, flexibility, reliability and cost effectiveness.

In my thesis research I developed five novel optical devices or subsystems to combat these technical challenges. Each of these devices/subsystems is described in an individual chapter including background survey, proposal of new features, theoretical analysis, hardware design, prototype fabrication and characterization, and experimental verification in DWDM systems.

The first is a novel tunable asymmetric interleaver that allows the interleaving ratio to be adjusted dynamically. Two design methods were proposed and implemented. Spectral usage optimisation and overall system performance improvement in 10G/40G and 40G/100G systems were successfully demonstrated through simulations and experiments.

The second is a colourless intra-channel optical equalizer. It is a passive periodic filter that restores the overall filter passband to a raised cosine profile to suppress the filter narrowing effect and mitigate the inter-symbol interference. 20% passband widening and 40% eye opening were experimentally achieved.

The third is a flexible band tunable filter that allows simultaneous tuning of centre frequency and passband width. Based mainly on this filter, a low cost expendable reconfigurable optical add/drop multiplexer (ROADM) node was developed. Its flexible switching features were experimentally demonstrated in a two-ring four-node network testbed.

The fourth is a transponder aggregator subsystem for colourless and directionless multi-degree ROADM node. Using the unique characteristics of the coherent receiver, this technology eliminates the requirement of wavelength selector, thus reduces power consumption, size and cost. I experimentally demonstrated that it can achieve < 0.5 dB penalty between receiving single channel and 96 channels.

The last is a real-time feedforward all-order polarization mode dispersion (PMD) compensator. It first analyses spectral interference pattern to retrieve phase information and calculate PMD, then it uses a pulse shaper to restore the pulse shape and thus compensates the PMD. These functions were demonstrated through experiments and simulations.

All of these novel devices and subsystems deliver new functional features and are suitable to be applied in the next generation DWDM systems to improve capacity, flexibility, and reliability and to reduce cost.