Development of A Chip Flow Model for Turning Operations Wang, Jun en_US 2021-11-25T12:38:07Z 2021-11-25T12:38:07Z 2001 en_US
dc.description.abstract A model is presented which predicts the chip flow direction in turning operations with nose radius tools under oblique cutting conditions. Only the tool cutting edge geometry and the cutting conditions (feed and depth of cut) are required to implement the model. An experimental study has verified the chip flow model and shown that the model’s predictions are in good agreement with the experimental results. en_US
dc.identifier.issn 0890-6955 en_US
dc.language English
dc.language.iso EN en_US
dc.rights CC BY-NC-ND 3.0 en_US
dc.rights.uri en_US
dc.source Legacy MARC en_US
dc.subject.other chip flow direction en_US
dc.subject.other Turning en_US
dc.subject.other machining en_US
dc.subject.other chip flow angle en_US
dc.subject.other chip control en_US
dc.subject.other Manufacturing Engineering not elsewhere classified (290399) en_US
dc.title Development of A Chip Flow Model for Turning Operations en_US
dc.type Journal Article en
dcterms.accessRights open access
dspace.entity.type Publication en_US
unsw.description.publisherStatement International Journal of Machine Tools and Manufacture is available via: en_US
unsw.identifier.doiPublisher en_US
unsw.relation.faculty Engineering
unsw.relation.ispartofissue 9 en_US
unsw.relation.ispartofjournal International Journal of Machine Tools and Manufacture en_US
unsw.relation.ispartofpagefrompageto 1265-1274 en_US
unsw.relation.ispartofvolume 41 en_US
unsw.relation.originalPublicationAffiliation Wang, Jun, Mechanical & Manufacturing Engineering, Faculty of Engineering, UNSW en_US School of Mechanical and Manufacturing Engineering *
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Peer-reviewed version.pdf
79.63 KB
Resource type