Publication:
Remote Synchronization of Onboard Crystal Oscillator for QZSS Using L1/L2/L5 Signals for Error Adjustment
Remote Synchronization of Onboard Crystal Oscillator for QZSS Using L1/L2/L5 Signals for Error Adjustment
dc.contributor.author | Suzuyama, T. | en_US |
dc.contributor.author | Hashibe, Y. | en_US |
dc.contributor.author | Fukushima, S. | en_US |
dc.contributor.author | Iwasaki, A. | en_US |
dc.contributor.author | Kokubu, K. | en_US |
dc.contributor.author | Tappero, F | en_US |
dc.contributor.author | Dempster, A.G | en_US |
dc.contributor.author | Iwata, T. | en_US |
dc.date.accessioned | 2021-11-25T13:37:50Z | |
dc.date.available | 2021-11-25T13:37:50Z | |
dc.date.issued | 2007 | en_US |
dc.description.abstract | A new error adjustment method for remote synchronization of the onboard crystal oscillator for the quasi-zenith satellite system (QZSS) using three different frequency positioning signals (L1/L2/L5) is proposed. The error adjustment method that uses L1/L2 positioning signals was demonstrated in the past. In both methods, the frequency-dependent part and the frequency-independent part were considered separately, and the total time information delay was estimated. By adopting L1/L2/L5, synchronization was improved by approximately 15% compared with that using L1/L2 and approximately 10% compared with that using L1/L5. | en_US |
dc.identifier.uri | http://hdl.handle.net/1959.4/40161 | |
dc.language | English | |
dc.language.iso | EN | en_US |
dc.publisher | IEEE | en_US |
dc.rights | CC BY-NC-ND 3.0 | en_US |
dc.rights.uri | https://creativecommons.org/licenses/by-nc-nd/3.0/au/ | en_US |
dc.source | Legacy MARC | en_US |
dc.title | Remote Synchronization of Onboard Crystal Oscillator for QZSS Using L1/L2/L5 Signals for Error Adjustment | en_US |
dc.type | Conference Paper | en |
dcterms.accessRights | metadata only access | |
dspace.entity.type | Publication | en_US |
unsw.accessRights.uri | http://purl.org/coar/access_right/c_14cb | |
unsw.identifier.doiPublisher | http://dx.doi.org/10.1109/FREQ.2007.4319289 | en_US |
unsw.publisher.place | Piscataway, USA | en_US |
unsw.relation.faculty | Engineering | |
unsw.relation.ispartofconferenceLocation | Geneva | en_US |
unsw.relation.ispartofconferenceName | Proc European Frequency and Time Forum and the IEEE Frequency Control Symposium EFTF/ IEEE FCS | en_US |
unsw.relation.ispartofconferenceProceedingsTitle | Proc European Frequency and Time Forum and the IEEE Frequency Control Symposium EFTF/ IEEE FCS | en_US |
unsw.relation.ispartofconferenceYear | 2007 | en_US |
unsw.relation.ispartofpagefrompageto | 1312-1317 | en_US |
unsw.relation.originalPublicationAffiliation | Suzuyama, T. | en_US |
unsw.relation.originalPublicationAffiliation | Hashibe, Y. | en_US |
unsw.relation.originalPublicationAffiliation | Fukushima, S. | en_US |
unsw.relation.originalPublicationAffiliation | Iwasaki, A. | en_US |
unsw.relation.originalPublicationAffiliation | Kokubu, K. | en_US |
unsw.relation.originalPublicationAffiliation | Tappero, F, Surveying & Spatial Information Systems, Faculty of Engineering, UNSW | en_US |
unsw.relation.originalPublicationAffiliation | Dempster, A.G, Surveying & Spatial Information Systems, Faculty of Engineering, UNSW | en_US |
unsw.relation.originalPublicationAffiliation | Iwata, T. | en_US |
unsw.relation.school | School of Civil and Environmental Engineering | * |