Effects of a porous jacket on sound radiated from a pipe Kanapathipillai, Sangarapillai en_US Byrne, Kerry en_US 2021-11-25T14:43:18Z 2021-11-25T14:43:18Z 1996 en_US
dc.description.abstract Conventional pipe laggings incorporate a porous jacket and an impervioius outer cladding sheet. It has been observed during investigations of such pipe laggings that a simple porous jacket applied by itself to a pipe can actually increase the sound radiated. Reasons for this phenomenon are discussed. The effect of rigid frame porous jacket around a pipe is examined theoretically for the breathing, bending and ovalling modes of pipe vibration. The predicted insertion loss associated with the bending mode of pipe vibration is compared with the corresponding experimental result and some of the results of a parametric study are given. en_US
dc.identifier.issn 0001-4966 en_US
dc.language English
dc.language.iso EN en_US
dc.rights CC BY-NC-ND 3.0 en_US
dc.rights.uri en_US
dc.source Legacy MARC en_US
dc.subject.other pipe laggings en_US
dc.subject.other insertion loss en_US
dc.title Effects of a porous jacket on sound radiated from a pipe en_US
dc.type Journal Article en
dcterms.accessRights open access
dspace.entity.type Publication en_US
unsw.description.publisherStatement Copyright 1996 Acoustical Society of America. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the Acoustical Society of America. Kanapathipillai S. and K. P. Byrne, J. Acoust. Soc. Am. 100, 882 (1996): en_US
unsw.identifier.doiPublisher en_US
unsw.relation.faculty Engineering
unsw.relation.ispartofissue 2 en_US
unsw.relation.ispartofjournal Journal of the Acoustical Society of America en_US
unsw.relation.ispartofpagefrompageto 882-888 en_US
unsw.relation.ispartofvolume 100 en_US
unsw.relation.originalPublicationAffiliation Kanapathipillai, Sangarapillai , Mechanical & Manufacturing Engineering, Faculty of Engineering, UNSW en_US
unsw.relation.originalPublicationAffiliation Byrne, Kerry, Mechanical & Manufacturing Engineering, Faculty of Engineering, UNSW en_US School of Mechanical and Manufacturing Engineering *
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
JASA Paper 1996.pdf
702.5 KB
Resource type