Science

Publication Search Results

Now showing 1 - 2 of 2
  • (2022) Cao, Jun
    Thesis
    This thesis focuses on the development and applications of magnetic resonance electrical properties tomography (MREPT), which is an emerging imaging modality to noninvasively obtain the electrical properties of tissues, such as conductivity and permittivity. Chapter 2 describes the general information about human research ethics, MRI scanner, MR sequence and the method of phase-based MREPT implemented in this thesis. Chapter 3 examines the repeatability of phase-based MREPT in the brain conductivity measurement using balanced fast field echo (bFFE) and turbo spin echo (TSE) sequences, and investigate the effects of compressed SENSE, whole-head B_1 shimming and video watching during scan on the measurement precision. Chapter 4 investigates the conductivity signal in response to short-duration visual stimulus, compares the signal and functional activation pathway with that of BOLD, and tests the consistency of functional conductivity imaging (funCI) with visual stimulation across participants. Chapter 5 extends the use of functional conductivity imaging to somatosensory stimulation and trigeminal nerve stimulation to evaluate the consistency of functional conductivity activation across different types of stimuli. In addition, visual adaptation experiment is performed to test if the repetition suppression effect can be observed using funCI. Chapter 6 explores if resting state conductivity networks can be reliably constructed using resting state funCI, evaluates the consistency of persistent homology architectures, and compares the links between nodes in the whole brain. Chapter 7 investigates the feasibility of prostate conductivity imaging using MREPT, and distinctive features in the conductivity distribution between healthy participants and participants with suspected abnormalities.

  • (2022) Qiao, Laicong
    Thesis
    There has been a rapid-growing market and academic enthusiasm for small wearable molecular diagnostic platforms driven by the growing demand for continuous monitoring of human health. Wearable devices need to be portable, stretchable, and ideally re-configurable to be able to work for different analytes. Such flexible physiological monitoring devices which are non-invasive or minimally-invasive represent the next frontier of biomedical diagnostics. They may make it possible to predict and prevent diseases or facilitate treatment by diagnosing diseases at the initial stages. However, there are many problems that restrict further applications of these devices. Firstly, there are a limited number of bio-materials which are highly flexible, biocompatible and have anti-fouling properties; such biomaterials are needed as substrates for wearable devices. Secondly, traditional biosensors used in wearable devices focus on the detection of physical signals (such as heartbeat) and small chemical molecules, e.g. Na+, K+. These are not sufficient to provide in depth health information which requires sensing of large molecules such as proteins, ideally in real time, which is currently challenging. This provides a motivation to develop highly sensitive wearable biosensors for the detection of large molecules in sweat. This thesis centres on the development of a bio-material based wearable device for continuous detection of crucial analytes in human sweat. To achieve this target, our first aim was to design a highly bio-compatible flexible material as a substrate for wearable devices. A tough and anti-fouling three-network hydrogel has been prepared by integrating a zwitterionic polymer network into a robust double-network hydrogel. Secondly, to fill the gap between technological development of continuous and non-invasive detection of different analytes in human sweat, a patterned sweat-based biosensor was created for the detection of key biomolecules. This sensor was produced by placing specific aptamers or enzymes on flexible working electrodes. In addition, nanotechnology methods have been applied to refine the bio-sensing interface to further increase the sensitivity of our sensors. Finally, a sample collection chip has been combined with our high sensitivity sensors to fabricate a wearable device for sweat bio-sensing purposes. Future research may involve integration of a commercially available wireless signal readout module with this wearable biosensing device. The outcomes of this work may provide new insights for the development of wearable devices for continuous measurement of a spectrum of analytes in sweat, as an important step towards point-of-care diagnostics