Deriving bathymetry from multispectral and hyperspectral imagery

Abstract

Knowledge of water depth is a crucial for planning military amphibious operations. Bathymetry from remote sensing with multispectral or hyperspectral imagery provides an opportunity to acquire water depth data faster than traditional hydrographic survey methods without the need to deploy a hydrographic survey vessel. It also provides a means of collecting bathymetric data covertly. This research explores two techniques for deriving bathymetry and assesses them for use by those involved in providing support to military operations. To support this aim a fieldwork campaign was undertaken in May, 2000, in northern Queensland. The fieldwork collected various inherent and apparent water optical properties and was concurrent with airborne hyperspectral imagery collection, space-based multispectral imagery collection and a hydrographic survey. The water optical properties were used to characterise the water and to understand how they affect deriving bathymetry from imagery. The hydrographic data was used to assess the performance of the bathymetric techniques. Two methods for deriving bathymetry were trialled. One uses a ratio of subsurface irradiance reflectance at two wavelengths and then tunes the result with known water depths. The other inverts the radiative transfer equation utilising the optical properties of the water to derive water depth. Both techniques derived water depth down to approximately six to seven metres. At that point the Cowley Beach waters became optically deep. Sensitivity analysis of the inversion method found that it was most sensitive to errors in vertical attenuation Kd and to errors in transforming the imagery into subsurface irradiance reflectance, R(0-) units. Both techniques require a priori knowledge to derive depth and a more sophisticated approach would be required to determine water depth without prior knowledge of the area of interest. This research demonstrates that water depth can be accurately mapped with optical techniques in less than ideal optical conditions. It also demonstrates that the collection of inherent and apparent optical properties is important for validating remotely sensed imagery.