Publication:
Nanostructured materials for photoelectrochemical hydrogen production using sunlight

dc.contributor.author Glasscock, Julie Anne en_US
dc.date.accessioned 2022-03-21T15:53:04Z
dc.date.available 2022-03-21T15:53:04Z
dc.date.issued 2008 en_US
dc.description.abstract Solar hydrogen has the potential to replace fossil fuels with a sustainable energy carrier that can be produced from sunlight and water via &quotewater splitting&quote. This study investigates the use of hematite (Fe&sub2O&sub3) as a photoelectrode for photoelectrochemical water splitting. Fe&sub2O&sub3 has a narrow indirect band-gap, which allows the utilization of a substantial fraction of the solar spectrum. However, the water splitting efficiencies for Fe&sub2O&sub3 are still low due to poor absorption characteristics, and large losses due to recombination in the bulk and at the surface. The thesis investigates the use of nanostructured composite electrodes, where thin films of Fe&sub2O&sub3 are deposited onto a nanostructured metal oxide substrate, in order to overcome some of the factors that limit the water splitting efficiency of Fe&sub2O&sub3. Doped (Si, Ti) and undoped Fe&sub2O&sub3 thin films were prepared using vacuum deposition techniques, and their photoelectrochemical, electrical, optical and structural properties were characterised. The doped Fe&sub2O&sub3 exhibited much higher photoelectrochemical activity than the undoped material, due to an improvement of the surface transfer coefficient and some grain boundary passivation. Schottky barrier modeling of Fe&sub2O&sub3 thin films showed that either the width of the depletion region or the diffusion length is the dominant parameter with a value around 30 nm, and confirmed that the surface charge transfer coefficient is small. An extensive review of the conduction mechanisms of Fe&sub2O&sub3 is presented. ZnO and SnO&sub2 nanostructures were investigated as substrates for the Fe&sub2O&sub3 thin films. Arrays of well-aligned high aspect ratio ZnO nanowires were optimised via the use of nucleation seeds and by restricting the lateral growth of the nanostructures. The geometry of the nanostructured composite electrodes was designed to maximise absorption and charge transfer processes. Composite nanostructured electrodes showed lower quantum efficiencies than equivalent thin films of Fe&sub2O&sub3, though a relative enhancement ofcollection of long wavelength charge carriers was observed, indicating that the nanostructured composite electrode concept is worthy of further investigation. The rate-limiting step for water splitting with Fe&sub2O&sub3 is not yet well understood and further investigations of the surface and bulk charge transfer properties are required in order to design electrodes to overcome specific shortcomings. en_US
dc.identifier.uri http://hdl.handle.net/1959.4/43106
dc.language English
dc.language.iso EN en_US
dc.publisher UNSW, Sydney en_US
dc.rights CC BY-NC-ND 3.0 en_US
dc.rights.uri https://creativecommons.org/licenses/by-nc-nd/3.0/au/ en_US
dc.subject.other hydrogen en_US
dc.subject.other photoelectrochemical water splitting en_US
dc.subject.other hematite en_US
dc.subject.other nanostructure en_US
dc.subject.other vacuum deposition en_US
dc.title Nanostructured materials for photoelectrochemical hydrogen production using sunlight en_US
dc.type Thesis en_US
dcterms.accessRights open access
dcterms.rightsHolder Glasscock, Julie Anne
dspace.entity.type Publication en_US
unsw.accessRights.uri https://purl.org/coar/access_right/c_abf2
unsw.identifier.doi https://doi.org/10.26190/unsworks/17525
unsw.relation.faculty Engineering
unsw.relation.originalPublicationAffiliation Glasscock, Julie Anne, Chemical Sciences & Engineering, Faculty of Engineering, UNSW en_US
unsw.relation.school School of Chemical Engineering *
unsw.thesis.degreetype PhD Doctorate en_US
Files
Original bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
whole.pdf
Size:
6.27 MB
Format:
application/pdf
Description:
Resource type